Alesis ADAT-M20 EC-1 Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 16
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
The First Hard Disk Recorder Worthy of the Name ADAT
9
like shareware.com.
41. What file formats does it support?
When using Ethernet to transfer files, songs on the HD24 will be available as AIFF or WAV files.
42. Can I share files/machines over the Internet?
The HD24 can be connected directly to the Internet. The networking setup pages in the utility
menu allow the user to setup its IP address, Subnet Mask, and Gateway. If the HD24's Ethernet
jack is attached directly to a cable modem/DSL line, its song files may be transferred over the
Internet to any computer that has been given the correct IP address (and, if you wish, a
password). Contact your Internet Service Provider to find out what IP address you should enter
into the HD24's Utility menu. Note: you can't record or play back while the HD24 is in FTP
Server mode.
43. How long does it take to transfer a track via Ethernet or the Internet?
Transfer speeds will depend on the speed of the connection, and the number of tracks (see ques-
tion # 20 ). But keep in mind: the result will be uncompressed, 24-bit linear digital audio, which
is the "gold standard" of audio quality.
IV. Inputs and Outputs
44. Do I have to purchase digitial and analog input and output options in order to begin
recording?
No. Unlike many higher priced competitors, the HD24 comes complete with 24 channels of ana-
log, 1/4” balanced TRS I/O as well as 24 channels of digital ADAT Optical (allowing for sam-
pling rates up to 96k). Yes, we’re selling the car complete with tires.
45. What type of converters does it use?
The HD24 uses 24-bit A/D and 24-bit D/A converters with 128x oversampling developed by
Alesis Semiconductor.
46. What’s the dynamic range of the A/D and D/A converters?
The A/D and D/A converters have approximately 104dB total dynamic range.
47. Can I connect both balanced and unbalanced signals to the analog I/O?
The HD24 supports the use of either unbalanced or balanced inputs and outputs, via the
forty-eight 1/4" TRS jacks on the back panel. No external hardware is required. Any analog
mixer will work with it.
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios